To start

Modified on Wed, 12 Feb at 11:08 AM

MySurvey is a software for visualizing data acquired by laser scanners.

The scans are represented as panoramic views. The physical location from which a scan was taken is a "station".

Several panoramic views are available (green or red) to visualize different stations at the same time.

It is possible to make measurements in the panoramic views, and to visualize these measurements in the different views (in the panoramic views, the plan view or the 3D view).

The project is divided into zones. Each zone is represented by a plan on which the stations belonging to this zone are shown.

Point clouds can be extracted for visualization in the 3D view or exported for use in other software.

MySurvey can import data in a variety of formats and integrate them into the panoramic, 3D or plan views.

MySurvey can be used without prior installation, as the software and data are present on the digital media provided.

It is advisable to make a MySurvey folder on the network and to put the executables and their associated folders there. The project data and the executable data can be located in two separate places.

If this solution is chosen, for optimal performance on MySurvey, the executable must be launched.
After choosing the project to run (see next chapter), a shortcut will be created next to the executable. It is then possible to copy it to the user's computer.

However, if all the data is local, the executable can be launched.